|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Fast access, 100% correct and complete service manual
 ;
just what i was seeking .had a password issue but the review allowed me to circumvent and download was great
 ;
Great manual, great price. Has a few of the basic operating instructions that most service manuals leave out. Complete instructions for disassembling board by board, safety precautions, schematics, complete parts list.
 ;
I am very pleased with the service manual for my RT-909. This was an easy purchase and great procuct, and much cheaper than other venues i had looked at. This web site is now listed in my favorites list. KEEP UP THE GOOD WORK. THANKS. J. BROWN
 ;
A very well written and easy to understand manual.
BLOCK DIAGRAM DESCRIPTION
ATSC/NTSC tuner (TDVB-001P) can receive both terrestrial analog and terrestrial digital signals. But a NTSC tuner (6700NFNS06C) can receive terrestrial analog only. Therefore if you run two displays at the same time, it is not possible to see two digital channels. A/V SW (CXA2069) is the IC that takes external input terminal signals and broadcast signals from the tuners and handles them selectively. Audio signals are sent to MSP4450. Video signals are sent to HD-II via two paths - VPX3226E on the upper side is used to handle sub displays, while VPX3225E on the lower side controls the main display. To the lower side, signals are sent using an expensive 3D-comb filter with Y/C divided. The video decoder (VPX3226E) is a chip that decodes input signals. HD-II is a chip that controls nearly all video-related functions, including brightness, sharpness, video formatting and scaling. If digital broadcasting is available, it comes through TP, which can be controlled from HD-II. Video SW (CXA2151) is an IC that outputs video signals selectively. The selected one is outputted through ADC (AD9883A) as a digital signal. uCom (M37272) interfaces with the main CPU and primarily plays the role of controlling power supply, remote controller and timers. Thus, while the set is turned off, it sends time information to uCom for management. TMDS Tx (Sil164) is the display stage that sends video data to the display medium according to the TMDS protocol, and the TMSD receiver accepts it and outputs display. CPU (S3C440BX) is the central processing IC, which controls most of the ICs.
- 17 -
|
|
 |
> |
|